涂裝是鋁板制作中比較重要的工序，涂裝質量的優劣，直接影響了鋁板的裝修作用．造成鋁板涂裝優劣的因素主要有四點，下面就讓我們鋁板廠家來帶大家了解一下這方面的內容吧．對這方面感興趣的朋友必定不能錯過．
Coating is an important process in the production of aluminium sheet. The quality of coating directly affects the decoration effect of aluminium sheet. There are four main factors contributing to the quality of aluminium sheet coating. Let's let aluminium sheet manufacturers take you to know about this aspect. Friends interested in this aspect must not miss it.
１、環境
1, environment
要求涂裝室內部清潔潔凈，做到防塵、防蟲和必定的通風功能，確保鋁板涂裝表面質量不受污染．一起因?yàn)闅鉁刈兓皶r(shí)更改工藝條件．
It is required that the interior of the painting room be clean, dust-proof, insect-proof and ventilation-proof, so as to ensure that the surface quality of the aluminium sheet coating is not polluted. Together, due to the change of temperature, the process conditions should be changed in time.
２、原材料
2. Raw materials
涂料和鋁板是涂裝過程中較能影響涂裝質量的因素，因?yàn)橥苛系呐沃g存在色差，涂料細度不行而涂覆率不高，涂料與溶劑配合不佳、分層等等會直接影響涂裝作用而產生缺點＇鋁卷基材的不平坦、膜厚不均勻、邊部撓曲度不佳等也直接影響產品質量和全體使用．因此，在選擇原材料時，應嚴格操控．
Coatings and aluminium sheets are the most important factors affecting the quality of coatings in the process of painting, because there are color differences between batches of coatings, poor fineness of coatings and low coating rate, poor coordination between coatings and solvents, stratification and so on, which will directly affect the coating effect and produce shortcomings.'The irregularity of the base material of aluminium coil, uneven film thickness, poor edge flexibility also directly affect the quality of products and the overall use of the coatings. Therefore, the selection of raw materials should be strictly controlled.

３、設備
3, equipment
涂裝線要求涂裝設備無缺，涂裝設備要求工作平穩，不能有橫、縱向抖動，涂裝輥要求研磨細膩．涂裝機所有輥?zhàn)訖M向跳動，有必要操控在允許范圍內，否則將嚴重影響涂層表面質量．
Coating line requires painting equipment to be complete, painting equipment to work smoothly, not to have horizontal and vertical jitter, coating rollers to be polished delicately. All rollers of the coating machine run horizontally, it is necessary to operate within the allowable range, otherwise it will seriously affect the surface quality of the coating.
４、工藝
4. Craft
涂裝工藝對涂裝的質量關系密切，要求對涂裝輥、提漆輥、計量輥和基材相對線速比率操控在必定的范圍內．要根據不同的系統和涂裝產品的膜厚，對涂料設定必定的粘度范圍，確保涂裝順利進行，促進產品質量的進步．涂料的固化工藝，烘箱操控有必要按要求操控，不得恣意變化，否則將嚴重影響涂裝產品的色差和功能．
Painting process is closely related to the quality of painting, requiring that the relative linear velocity ratio of painting roll, painting roll, measuring roll and base material should be controlled within a certain range. According to different systems and film thickness of coating products, a certain range of viscosity should be set for coating to ensure smooth painting and promote the progress of product quality. Coating curing process and oven operation should be operated according to requirements. Control, not arbitrary change, otherwise it will seriously affect the color difference and function of painting products.
以上信息是我們鋁板生產廠家整理發布希望對大家以后的生活帶來一點幫助我們的網站是：http://www.ssstlc.com！
The above information is our aluminium plate manufacturer to collate and publish hope to bring you a little help in the future life of our website is: http://www.ssstlc.com!